This item is considered blemished and may include but is not limited to slight scuffs, scratches, and/or missing components such as screws.

Blemished items are priced accordingly and are sold as is.

No returns, refunds, or exchanges.

Andersen Storm Door Hardware, Estate Style

Special 1 inch Backset with special Off center cylinder
The handle can be used on Andersen 3000 & 4000 Series storm doors with a mortise lock and/or multipoint lock.

Euro-Style Profile Cylinder: Off-Center
Cylinder Type: offset tail piece
Overall length: 2-1/8 (55mm)
Inside Measurement: 1-1/4 (32mm) to screw hole
Outside Measurement: 7/8 inch (22mm) to screw hole
Keyway: Schlage 5 pin, SC1 Rekeyable, 2 keys

Mortise Lock Measurements:
Backset: 1 inch. Mortise lock body (standard is 7/8)
Backset is measured from edge of mortise lock to center of handle
Trim plate mounting screw holes: spaced 6-11/16 Inch
Door Thickness: 1-1/2 inch

Handle Style: Estate
Handle Diameter Hole: 9/16 inch (standard 5/8 inch)
Handle Spindle: 5/16 Square, 3-1/4 Length

PLEASE NOTE
This Lock will work only on doors with these measurements,
Style might be different from the current lock.
Old Style had a round hole for the outside plate. (discontinued)
To reverse the handing of the Mortise Lock, simply remove the Faceplate and rotate the Spring Latch 180 degrees, then reconnect the faceplate.

Andersen / Emco Quick Change storm door mortise lock hardware with Lock bar uses 302047
The inside plate has a thumb button to release the Glass insert

This item is considered blemished and may include but is not limited to slight scuffs, scratches, and/or missing components such as screws.

Blemished items are priced accordingly and are sold as is.

No returns, refunds, or exchanges.