This Hinge is Discontinued. - Can be replaced with HOPPE or Amesbury Adjustable Hinges - See options Below

Unfortunately, the Columbus hinge has been discontinued by the manufacture in favor of the Ultimate hinge. The Ultimate is stronger in comparison to the Columbus and is the same shape. Aside from the strength, the only difference between the two is the Ultimate is 1 mm (1/32") thicker than the COLUMBUS hinge. The customer will be able to compensate for this by adjusting the hinge to accommodate the thickness. If they need to have 100% precision, they can route, shave or sand the door 1 mm on the bottom side of the route.

Additional 2D Hinge Info:
This hinge was sold by HOPPE HTL and used by Pozzi, Caradco, Hurd, Jeldwen, Windsor, Crestline and others
Typically found on doors using the Fuhr brand multipoint lock.
The old style 2D hinge fit a route in the door panel and frame of 3-5/8 inch (92mm)
Hinge will work on Outswing Doors, but does not have NRP set screw to prevent pin removal.

2D Adjustable Hinge Specifications: NRP, Non-Removable Hinge (set screw)
Hinge Size: 3-5/8 x 3-5/8 inch (92x92mm)
Hinge Type: SET HINGE (V), Adjustable for Vertical movement
The Guide Hinge (H) is installed at the top and bottom to provide horizontal adjustment.
They are used with the SET HINGE (V) which is installed at the center for vertical adjustment
Four hinge doors have an additional Set or Guide Hinge depending on weight.
Jamb Screws - #9 x 3/4 Phillips Flathead;
Panel Screws - #8 x 1-1/2 Phillips Flathead.
Handing: Non-handed, Reversible, Removable Pin for Left or Right hand doors
Color / Finish: Antique Brass / Brown with brassy Highlights

Sold Each, Priced Each - NO Screws

NOTE: If you need a complete set of 3 or 4 hinges replaced, we recommend replacing with one of the options below

Replacement Options
Amesbury Adjustable Hinges
HOPPE Adjustable Hinges