Discontinued Item - Replacements Available
Fuhr 2 Roller Manual Version with 37 Inch Handle Height - Discontinued

Bottom Roller: 29.53 inches down from Handle
Top Roller: 28.74 inches up from Handle
Handle Height: 37 inches
Faceplate Width: 5/8 inch (16mm)
Backset: 1-3/8 inch (35mm)
Deadbolt throw: 25/32 inch (20mm)
FUHR overall length: around 77 inches - depends on particular door / manufacturer

2 Replacement Options: 
1. 4990200 - HOPPE roller-style multipoint lock: easiest replacement: this replacement kit has the same roller positions as original FUHR lock and roller strikes will not need to be moved; deadbolt strike will need to be moved up or down or modified to fit new deadbolt and spring latch; kit fits locks from 67.91 inches to 78.75 inches and will likely need to be trimmed with a hacksaw to fit door.

2. 4990275 - HOPPE roller / shootbolt multipoint lock: this replacement kit has the same bottom roller position as original FUHR lock; top roller strike will be left unused. Deadbolt strike will need to be moved up or down or modified to fit new deadbolt and spring latch; kit fits locks from 76.61 inches to 80.55 inches and will likely need to be trimmed with a hacksaw to fit door; hole for socket strike will need to be drilled in top of door jamb.

NOTE: Both replacement kits are designed for 36 inch handle height; when used as a replacement for the FUHR 37 inch, the metal faceplate of a HOPPE replacement will be 1 inch shorter, leaving a gap at bottom of door panel.
This gap can usually be filled with the cutoff from top extension, if desired.

For instructions on how to do replacement with option number 1, read article: Replacing FUHR with HOPPE Roller 
For instructions on how to do replacement with option number 2, read article: Replacing FUHR with HOPPE Roller/Shootbolt
Additional Article: How to Change the Handing on a Fuhr Lock (Change direction of slope of latch)